The following content has been automatically translated by close 

Auto Mechanics find New Way to Save the Environment and Money

By Expert Author: John Buie | Article Abstract
Word Count: 382 words | Views: 340 view(s)
Ultrasonic Auto Engine Parts CleanerThere are so many uses for an ultrasonic cleaner in an auto shop. Ultrasonic car parts cleaning saves time by eliminating the need for manual scrubbing of auto parts covered with grease, oil, and other lubricants. Besides freeing up time, the hazardous chemicals can be replaced with biodegradable soaps. Specific examples of items that are commonly cleaned by a benchtop ultrasonic cleaner include filters, shock absorber parts, power steering parts, pistons, valves, fuel injectors, bearings - just to name a few. Larger industrial-sized units can be used for ultrasonic carburetor cleaning and ultrasonic exhaust manifold cleaning, where cleaning action is needed deep within the network of passages. This large capacity also allows for ultrasonic crankshaft cleaning and ultrasonic cylinder block cleaning as well the means to clean multiple parts at once.

For marine mechanics, an ultrasonic cleaner can clean virtually any part within minutes and also provides an alternative to using toxic cleaning agents. When cleaning marine inboard and outboard motors, a cleaning solution that is both thorough and gentle is necessary because many parts are made out of Ultrasonic Auto Engine Parts Ultrasonic Cleaneraluminum. Not only do these parts need to be cleaned, but they need to be cleaned in a way that prevents future corroding. An ultrasonic boat part cleaner is the answer because ultrasonic cleaning is gentle enough to not harm the parts yet powerful enough to remove the soil. As with cars, an ultrasonic carburetor cleaner is employed to clean the carburetors from boat motors as well.

For aircraft mechanics, carbon deposits can present a cleaning challenge. Ultrasonic aircraft parts cleaning not only readily removes carbon deposits, but speeds up the cleaning process considerably and is much safer than working with the toxic chemicals previously used. An industrial-sized ultrasonic aircraft parts cleaner can accommodate large parts or multiple parts, including fuel nozzles, brake parts, turbine blades, and generator components. Parts are thoroughly cleaned and restored to their original condition, which is especially important in aircrafts.

Ultrasonic cleaners can help address many issues that mechanics face today: the need to save time and money and to protect both workers and the environment. By using an ultrasonic cleaner, the process of cleaning engine parts is greatly accelerated and expensive, toxic chemicals are replaced by a cost-effective, environmentally friendly alternative.
John Buie

About the Author/Author Bio

ultrasonic cleaner, benchtop ultrasonic cleaner

Article Source: http://www.et.articlesphere.com/Article/Auto-Mechanics-find-New-Way-to-Save-the-Environment-and-Money/190270

Article Submitted: 2009-11-30 | This Article has been viewed 340 times.
Related Videos

 

Related Articles

 
 

Listed below are more articles related to the above article from the "Automotives" article category.

People interested in the above article "Auto Mechanics find New Way to Save the Environment and Money" are also interested in the related articles listed below:

 
There is a lot of competition in the market in the mid-size sedan segment of cars. Manufacturers try to go one up on their rivals. Amidst such a tough scenario Mazda 6 has been able to create a niche for itself as a car which inspires enthusiasm and strong attachment. It is a driver friendly car compliant and neat in its movements.
Bronco was first introduced by Ford in 1966. It was used mainly for trails and had the ability to negotiate rough roads. It can be called the first sport utility vehicle which could serve as a family sedan, sports roadster, farm vehicle, or even a truck. Since then it has undergone continuous changes with some important changes in 1975 and 1992. However, it was not manufactured after 1996. In the beginning it was a small two door SUV. Later on its size was increased to full size. Some people still preferred the earlier compact car. Its power was increased and its body styling and interior were upgraded. A new grille was added and its front was improved. All Broncos were four wheel drive vehicles.
Most fog lights available in the market have a yellow colored beam. And it is not clear why it is so. It maybe that someone thought that yellow colored light penetrates the fog better since it doesn't scatter as much as white light. But the water droplets in fog are quite large and the scattering will be independent of the wavelength and the yellow light will not penetrate further than other light colors. It maybe that the lights were made to look different from ordinary headlights and the yellow color caught on and became an industry standard. Whatever maybe the reason the color of the fog light is less important than the way they are mounted on the car.
If you take a car and drive it at its limits sometimes the suspension is not stable enough and the feeling you get is the car isn't very steady. Although this is unlikely to lead to the car losing its balance but it is not a very pleasant feeling to sit in a car that is moving at high speeds but is not very steady. Now you may have in fact boosted the performance of your car through several improvements after you bought the car. And as the car performance got better you will have needed to make sure the suspension of the car kept pace. One great option you have to make the car more stable is a strut bar.
On an island as small as Britain, it's very easy to stumble across one historic road or another whilst carrying out transport contracts. These ancient Roman roads or old trap roads intended for horse and carriage can tell us a lot about Britain's history. Here is a selection of my favourite roads in Britain; some of them have a past so interesting that I could almost forgive them for the odd traffic jam:
When you bought your car it would have been as it is said a shining new car. And as it grew older some of the shine would have turned dull and when it grew older still the shine may have gone out. Not that the car is no longer important to you. It probably does its job almost as well as it did on day one and gives you no cause for complaint. Yet you would enjoy getting the shine and excitement back.
The car maker Honda has named one of their cars Acura Legend. Is it not audacious to include the word legend in the name? What would be the consequence if it did not measure up to the expectations raised by the term legend in its name? At least it will invite ridicule. On the other hand the use of such a term may signify the trust the car maker has in its ability. The car was launched in 1986. It was available both in sedan and coupe body styles and drew admiration both from buyers and reviewers. Since then it has been held in high regard. It combined reliability with luxury. In 1994 a more powerful engine and larger wheels were introduced.
 
Article Directory Home All Categories Automotives
 

Can't find what you're looking for? Try Google Search!
 
Copyright © 2005 - by Larry Lim, Singapore - Article Search Engine Directory at ArticleSphere.com™
All Rights Reserved Worldwide. All Trademarks and Servicemarks are the property of the respective owners.